A gardener stacked 4 terracotta pots upside down, and they became a lighthouse for bees
  1. Homedit
  2. DIY Projects

A gardener stacked 4 terracotta pots upside down, and they became a lighthouse for bees

A hot afternoon, a bowl of water left out in the yard, and a few bees circling the rim. One lands too close to the edge, slips in and can’t climb back out. You meant to help, and the water became a trap.

Terracotta pot for a DIY bee bath
© Dhoxax

The water wasn’t the problem, the depth was. The TikTok creator The Gooch (@the_gooch) built a fix that also looks good in a flower bed: four terracotta pots stacked upside down into a little lighthouse, topped with a saucer of glass beads and just enough water to cover them. The caption on the video: “My favorite garden DIY of the year.”

Why a saucer of glass beads beats a bowl of water

Bees carry water back to the hive. NC State Extension explains that they use it to help regulate hive temperature and to thin honey for larvae. Its advice for a simple bee bath is to add just enough water to touch the tops of the pebbles, so bees can land and drink without risk of drowning. The glass beads in the lighthouse saucer do the same job.

Water works best near the plants bees already visit. Lavender is one of the easiest draws: its spikes of small purple-blue flowers are a color bees spot easily, and a large grouping of lavender keeps them moving from flower to flower in one area.

From four clay pots to a lighthouse with a door

  1. Gather the parts. Four terracotta pots in different sizes, with a saucer for the smallest. From Dollar Tree: small pebbles, larger rocks, artificial moss, a solar stake light, glass beads, and fairy garden windows and a door. Add blue and white acrylic paint, a foam brush and glue.
  2. Build the rocky base. Paint the bottom section of the largest pot and leave its rim bare. Glue the larger rocks onto the rim, then fill the gaps with small pebbles.
  3. Paint the stripes. Paint the upper sections of the two medium pots white and the lower sections in color. Paint the smallest pot one color and the underside of the saucer white. Let everything dry.
  4. Set the top pot. Glue the rim of the smallest pot and set it upside down in the center of the saucer.
  5. Add the lamp. Paint the top of the solar light white, keeping paint off the panel. Remove the stake and glue the light into the drain hole of the smallest pot.
  6. Decorate and stack. Glue on the windows, the moss and the door. Stack the pots upside down, largest at the bottom, then fill the saucer with beads and just enough water to cover them.

The Gooch used hot glue. Several commenters warned that it may not last outdoors and suggested E6000, a more waterproof craft adhesive.
Plan B, if you don’t have an afternoon for painting: keep just the saucer. A shallow dish of pebbles with water touching their tops gives bees the same safe place to drink.

What a water stop for bees needs once it’s outside

A sunny spot helps pollinators find it, but NC State Extension notes that full sun can overheat the water and deep shade can encourage algae, so morning sun with light afternoon shade is ideal. Keep it away from doors, paths and play areas. About 15 to 20 feet from where people walk is a common rule of thumb, and it matters more if anyone at home is allergic to stings.
Standing water also draws mosquitoes. The CDC advises emptying and scrubbing items that hold water once a week, including flowerpot saucers and birdbaths, and NC State Extension suggests dumping and rinsing every couple of days. Rinse the beads and refill with fresh water.
Check the glue after heavy rain, and reattach any loose rock or window before the piece starts to shed.
Give bees something to stand on, and the water becomes a stop instead of a trap. That’s the trick.