How to Stain Wood: A Basic Step By Step Process

Learning how to stain wood can empower you to tackle DIY projects and furniture makeovers. Staining wood is a simple process that’s easy to learn and hard to mess up.

how to stain wood

If you’ve never stained wood before or worked with a wood finish, don’t worry, we will show you how. At the end, you’ll be ready to stain your first piece of furniture.

History Of Wood Stain

History Of Wood Stain

In 1750, craftsmen used wax to stain wood. The practice carried over into the next century when woodworkers began using beeswax. During the Victorian Age, craftsmen finished wood surfaces with hardening oil, varnish, and wax.

Oil-based stains, like walnut and linseed oil, rosin, amber, copal, gum, turpentine, and cheap wine, were mixed to make wood harder and longer lasting. The oil base created a film over the surface, protecting it from scratches, abrasions, and indoor moisture.

In the 1920s, stains were manufactured and became more available to the public.

In What Is The Difference Between Finish And Stain?

Wood stains add color, while wood finishes seal and protect wood from moisture. A stain isn’t a finish because it requires varnish or a second coat of finish to protect the wood.

Also, wood finish is thicker than stain. Wood that has been stained and coated with polyurethane or lacquer will give the surface a richer color and a sometimes wet look.

Here are the most popular wood stain colors:

Different Types Of Wood Grain Stain

Oil-Based Stains

Oil-based stain is the most popular worldwide for interior design projects. It is durable and can break through tough wood layers. Linseed oil is natural and non-toxic and preserves a wood finish or paint. Oil-based stains are versatile, as DIYers can thin them with mineral spirits.

Water Based

Water-based stain is thinner than oil-based stain. It contains chemically derived water-soluble aniline dyes that pass color.  The dyes are made with powder from coal. 

Water-based stains have strong pigments that bolster wood grains and leave surfaces with a smooth finish. One downside is they dry fast, making them hard to work with for beginners. With water-based stains, the most important step is cleaning and drying the wood’s surface before staining.

Lacquer

Lacquer stains don’t have lacquer in them – they’re just called lacquer stains. These stains dry fast and have an unmistakable odor due to their ketones and xylene content. Lacquer stains are thin, which means they dry fast but require more than one coat.

Water-Soluble Dye

Water-soluble stains come in powder form. When mixing them, add an ounce of powder with one quart of water. For darker colors, increase the amount of powder in your mixture. They will fade after extended exposure to UV light, so it’s best if you use them on indoor furniture.

Metal Dye

Otherwise known as grain-raising stains (NGRS), metal dye stains are ready-to-use. They’re dissolved in glycol ether blended with ethanol, retarder, or methanol. Unlike other stains, their color lasts longer and doesn’t fade easily.

Varnish Wood

Varnish wood stains are hard drying and ideal for small wood projects. Although they are strong, you will need to apply more than one coat.

Gel

Gels are the newest addition to the stain family, first made available to the public in the late 20th century. Gel stain is a high-viscosity liquid with thick jelly pigments.

Can You Stain Green Treated Wood?

For outdoor wood projects, pressure-treated lumber is common. It is recommended to stain treated wood. Staining pressure-treated wood is good for exterior wood surfaces and can reduce surface cracking.

Types of Treated Wood

  • Wet-treated wood – this is the most common and will be wet when you buy it. It may even “spit” at you when you nail it down. Let it dry before you stain it.  
  • Water repellent treated wood – look for a tag that says “Thompsonized” or ask the dealer if your lumber is this type.
  • Kiln-dried pressure-treated lumber -stain the wood immediately with water-based stains.

DIY Level: Beginner

How to Stain Wood- Paint Pre stain

Stain Wood Materials:

  • Unfinished or scrap piece of wood, clean and dry.
  • Wood conditioner.
  • Stain of your choice.
  • Wood finishing coat, such as polyurethane.
  • Bristle brush.
  • Lint-free rags.
  • Drop cloth.

Note: The pre-stain, stain, and topcoat must be compatible. If one is oil-based, the others must be oil-based. A water-based stain doesn’t work well on top of oil-based pre-stains, for example.

How to Stain Wood – A Step-By-Step Guide

Start with pre-stain or pre-stain wood conditioner

How to Stain Wood- Pre Stain Brush

Begin with your pre-stain or pre-stain wood conditioner. Ensure the piece is clean and dry. When you prep wood, there should be no finishes on it. If there are, use a stripping agent to remove previous finishes.

Apply the Pre-Stain Wood Conditioner

How to Stain Wood- Apply Pre Stain

Apply pre-stain wood conditioner with a clean bristle brush to a portion of your wood. If the pre-stain is absorbing, move to the rest of your wood piece.

How to Stain Wood- Entire wood piece pre stain

The pre-stain wood conditioner will help even out the wood and promote better stain absorption.

Allow the Pre-Stain Wood Conditioner To Dry

How to Stain Wood - 5 minutes dry

Wait 5-15 minutes for the pre-stain wood conditioner to be absorbed before you start staining.

Clean the Surface

How to Stain Wood- Use a clean rag

Use a lint-free cloth to clean the surface.

Prepare the Stain

How to Stain Wood- Finish paint

You have a small window to apply the first coat – for best results, about two hours. Stir the stain (remember, use oil-based if your pre-stain is oil-based) to avoid air bubbles. Stir during the entire process, depending on the size of the project.

Apply the Stain

Apply the stain to an inconspicuous spot with a bristle brush.

How to Stain Wood - back paint

Stain an inconspicuous spot on your piece, such as the underside of the bench. 

How to Stain Wood - apply the wood stain

Apply the stain in the direction of the wood grain. Be sure to brush away drips, as these may cause odd lines or unevenness in your finished stain. Use a tack cloth to catch any waste.

How to Stain Wood Project Stain

Work in small sections, one area at a time, to create an even stain.

Allow the Stain To Dry

How to Stain Wood- Stain absorb

Wait 5-15 minutes for the stain to absorb. (This example shows a 7-minute absorption time of Dark Walnut stain.) The longer the stain has to absorb into the wood, the deeper the color, the darker the wood will be.

Wipe the Surface Clean

How to Stain Wood- wipe excess

Remove excess stain with a clean cloth. Don’t let the excess sit on your unfinished wood. It will look blotchy and will be sticky.

How to Stain Wood- ready to stain all wood piece

After staining the hidden areas, you’re ready to finish your wood project. Be sure to check the time and follow in the same manner so your stain will absorb evenly.

How to Stain Wood- waiting and wiping

After applying, waiting, and wiping the stain over your wood piece, take a break. You’ll need to wait at least eight hours or more, depending on the humidity and temperature. Allow the stain to absorb and dry.

How to Stain Wood- Beautiful paint

If you decide a few hours later that you want your wood piece a bit darker, reapply a second coat of stain, following the same procedure. Allow it to dry after you wipe the second coat of stain away.

Add a Protective Coat

How to Stain Wood- protective stain coat

After the stain has dried and you like the result, apply a protective coat. Remember, the top coat should be the same as your pre-stain and stain – oil-based to oil-based, water-based to water-based. This example uses a clear coat polyurethane for the finishing coat.

Carefully stir the polyurethane

Stir the polyurethane and mix the bottom of the can. Do not shake, as this can cause air bubbles.

natural bristle or foam brush

Use a natural bristle brush or foam brush to apply the polyurethane. When staining wood, apply it with the grain in an even but light coat. Allow the poly to dry for 3-4 hours or until it’s no longer tacky. Lightly sand with 220-grit sandpaper, wipe clean, and apply a second coat.

Apply a Second Coat Of Finish

How to Stain Wood- repeat the sand-and-apply-poly

Repeat the sand-and-apply-poly process several times. This example shows two coats of polyurethane. Allow 48 hours for the polyurethane to dry.

Final Result

How to Stain Wood- outdoor bench

Congratulations. You’ve just completed your wood project.

How to Stain Wood Project

It’s amazing how stained wood can make common wood look stunning.

How to Stain Wood Darker

Before you can make wood darker, ensure the existing stain is compatible with the new stain. If staining over a polyurethane surface, use a gel stain. Polyurethane is a sealer that makes surfaces non-absorbent. A gel will complement the surface.

Preparation

Remove excess pieces from the wood that you want to stain. For example, if you’re working on a door, remove the doorknobs and handles.

Sanding Stain Wood

Use TSP or a degreasing soap to clean the wood surface before applying the new stain. Dust or grime will prevent it from sticking and could give the surface a bumpy look.

Sand the surface with medium-grit sandpaper or 220-grit sandpaper for a textured feel. Sanding helps the stain adhere to the surface.

Apply Wood Stain

Apply wood stain to the wood surface with a tack cloth or synthetic bristle brush. Use even strokes and go with the direction of the grain or in a circular motion. You could try a lint-free rag for smaller projects.

Toner

If you want a darker color, toner will help. Toners can remove unwanted yellow and green spots. A toner will also add to the project’s shelf-life as it provides extra surface protection. Allow the toner to dry for 24 hours. Before you reassemble the wood project, wipe it with a damp cloth.

Frequently Asked Questions (FAQ)FAQ

Why Does Some Stain Wood Not Take Stain?

Wood takes stain differently based on its surface and if it’s already sealed. Stain cannot sit on wood, but should  soak and dry in wood pores. If the wood you’re working with has been sealed by polyurethane or a finish, it will be useless because it won’t reach the wood pores.

Can You Use Wood Conditioner After Staining?

Do not put a wood conditioner over wood stain. You should use wood conditioner beforehand. If you apply a conditioner afterward, it will remove the stain.

How Long Does Wood Stain Take To Dry?

On average, after applying stain, it will take between 24 and 48 hours to dry. Depending on your wood furniture, you might need to wait 72 hours before applying polyurethane to finish your project. 

How To Get Wood Stain Off Skin?

You can remove wood stains with rubbing alcohol or isopropyl alcohol and acetone. Use a clean rag and solvents and rub the skin. Afterward, rinse your skin with lukewarm water and soap.

Can You Paint Over Stained Wood Without Priming?

If your paint adheres without bleed-through, you can paint over stained wood and you won’t have to prime. If streaks appear, then you will need to prime with a bonding, stain-blocking primer.

How To Get Wood Stain Out Of Carpet?

To remove wood stain from your carpet, you can use acetone and a lint free rag as a DIY solution. Blot the stain and wipe. For bigger stains, WD-40 or lacquer thinner will help break down the stain particles. If all else fails, enlist the services of a professional carpet cleaner and steam clean the carpet stains.