She glued IKEA serving bowls together, and they became the base of her coffee table
Sculptural round bases are the part of a designer coffee table that’s hardest to copy. Square legs and plain frames are easy to find. A base that looks like three soft stones holding up a sheet of glass usually isn’t.

The base didn’t need to be carved or cast. The TikTok creator @frejodesign built hers from kitchenware: IKEA BLANDA BLANK stainless steel serving bowls, glued rim to rim into spheres, with a thrifted glass top on three of them. “This is still my favorite DIY I’ve ever made,” she wrote.
How two bowls turn into one sphere
A serving bowl is already half a ball. Join two at the rim and you have a hollow globe. Cover the seam and the shine with a plaster-like coating, and nobody sees a bowl anymore. The 14-inch BLANDA BLANK bowls are about 6 inches high each, so two of them make a solid, rounded leg.
IKEA pieces rarely have to stay what they were sold as. In another hack, a bamboo armrest tray, a lazy Susan and a planter were combined into a fluted side table that looks custom-made.
From kitchen bowls to coffee table base
- Glue the rims. Join two bowls with a heavy-duty adhesive made for metal, such as epoxy or E6000. Masking tape holds them together while it cures, and E6000 can take 24 to 72 hours.
- Hide the seam. Wrap mesh drywall tape around each joint.
- Coat the whole sphere. Spread pre-mixed joint compound with a palette knife and a slightly damp sponge.
- Sand and texture. Smooth it with fine-grit sandpaper. A second coat of uneven thickness gives a more textured look.
- Prime and paint, or don’t. If you paint over the compound, prime first. The creator left hers natural, a slightly off-white.
- Set the glass. Her thrifted triangular top rests on three spheres. Drilled holes with standoff hardware or glass top adapters bonded with clear epoxy hold it in place.
The 14-inch bowls run about $20 each, so six bowls for three spheres come to about $120, plus about $20 for the tape and compound. Glue, glass and hardware come on top of that.
Plan B, if you don’t want to drill or glue anything to the glass: silicone bumpers between the spheres and the top are a cheaper option that isn’t permanent.
What glass, glue and plaster dust ask of you
Expect a low table. Unless you stack more bowls, the finished piece sits below the typical 16 to 18 inches of a coffee table, which matters if you eat or work at it.
Choose the glass carefully. A thrifted top won’t always say whether it’s tempered, and a low glass table in a home with kids or pets takes knocks. Ask before you buy, and keep the edges smooth.
Sanding joint compound makes fine dust. NIOSH notes that over time, breathing drywall joint compound dust may cause persistent throat and airway irritation. Sand outdoors or with a dust mask, and give the glue its full cure time before you set any weight on top. Look at what’s in your kitchen cabinets before you shop for furniture. That’s the trick.
