Toss Your Plastic Soap Dispenser: An Old Mason Jar and a Coat of White Paint Make a Vintage Replacement
  1. Homedit
  2. How To, Tips, and Advice

Toss Your Plastic Soap Dispenser: An Old Mason Jar and a Coat of White Paint Make a Vintage Replacement

Plastic soap dispensers tend to sit beside the sink until they are empty, then get replaced with another bottle. An old Mason jar offers a different option. With white spray paint and a pump taken from an existing dispenser, the glass container can become a refillable soap bottle that resembles vintage milk glass.

Toss Your Plastic Soap Dispenser An Old Mason Jar and a Coat of White Paint Make a Vintage Replacement

The white finish covers the transparent glass but leaves its raised lettering visible. A silver metal pump adds a contrasting detail, while the jar’s screw-on lid keeps the assembly in place.

Toss Your Plastic Soap Dispenser An Old Mason Jar and a Coat of White Paint Make a Vintage Replacement

Homedit contributor Erin Francois created this project using a pint-sized Mason jar, white lacquer spray paint, a soap pump, glue, and fine-grit sandpaper. The design takes inspiration from the milk-glass containers popular in the early 20th century.

A Mason Jar Gets a Coat of White Paint

A Mason Jar Gets a Coat of White Paint

The makeover begins with a clean Mason jar and white lacquer spray paint. Erin coated the outside of the glass, leaving the interior free of paint for holding liquid soap.

The painted jar was left to dry for about 20 minutes before assembly continued.

The Metal Lid Needs an Opening for the Pump

The Metal Lid Needs an Opening for the Pump

A hole in the center of the metal lid allows the dispenser mechanism to pass through. The opening must fit the pump stem without leaving large gaps.

Erin used a paring knife in the original project, but a suitable metal-cutting tool is a safer choice for the lid. Cut metal can leave sharp edges that need smoothing before handling.

A Soap Pump Fits Through the Lid

A Soap Pump Fits Through the Lid

The pump passes through the opening, with its dispensing spout above the lid and the intake tube extending beneath it.

A pump salvaged from another soap bottle can work if its tube reaches into the jar and its mounting section fits the lid.

Glue Secures the Pump Beneath the Lid

Glue Secures the Pump Beneath the Lid

Erin applied all-purpose glue around the underside of the pump fitting to secure it against the metal lid. She allowed about 30 minutes for drying in the original tutorial.

The adhesive should be suitable for the materials and kept away from the soap-contact surfaces.

The Painted Jar Becomes a Soap Dispenser

The Painted Jar Becomes a Soap Dispenser

With the pump attached, the lid sits on the jar opening and the threaded metal band holds the parts together. The finished assembly retains the shape of a traditional Mason jar, including its embossed lettering and rounded shoulder.

Sandpaper Reveals the Raised Lettering

Sandpaper Reveals the Raised Lettering

Fine-grit sandpaper removes small amounts of white paint from the raised lettering. This step makes the embossed details more visible without stripping the finish from the rest of the glass.

The Finished Jar Resembles Vintage Milk Glass

The Finished Jar Resembles Vintage Milk Glass

The finished dispenser pairs an opaque white glass body with a silver metal pump. Its original Mason jar lettering remains visible across the front.

A refillable soap container now replaces

A refillable soap container now replaces the original plastic bottle. The painted finish may need protection from repeated splashes and handling, particularly around a kitchen or bathroom sink.

Would you turn an old Mason jar into a soap dispenser or keep a standard refillable bottle?

Original project and photographs by Erin Francois for Homedit.