DIY Chicken Wire Frame With A Cute Twine Flower

A picture frame is a lot more versatile than you think. You can turn into a beautiful and unique decoration just by making a few changes to it. When you’re done you’ll have a lovely chicken wire frame.

What we need

– wood frame – paint brush – chicken wire – tongs – mini clothespins – twine – light blue acrylic paint – scissors – hot glue glue – decorative tape

Let's make DIY Chicken Wire Frame

1

Remove the backing: Before you do anything else, remove the backing from the wooden frame. You’re not going to need it and you can set it aside and use it on a different project. Remove it gently so you don’t damage the frame.

Paint the frame: The next thing you need to do is paint the frame. Get a pair of gloves if you don’t want to get paint on your hands. Then start painting the whole front of the frame and make sure you also paint the inside and the outside edges as well.

2

Cut a piece of chicken wire for the new backing: Wait until the second coat of paint is nice and dry, then flip the frame over and place the chicken wire over it. Use your tongs to cut it in order to make a new backing for the frame.

3

Glue the chicken wire onto the frame: The next step is to glue the chicken wire backing onto the frame. Plug in your hot glue gun and let it get hot, then apply small dabs of hot glue around the inner edge of the frame and then add the piece of chicken wire on top.

4

Paint the chicken wire: Use your paintbrush and some of the leftover acrylic paint to paint the chicken wire backing so it matches the frame. Don’t rush the process and make sure you cover all the corners and all the bits.

5

Swipe Up for the full list of instructions!

For More Posts Like This Visit Homedit!