Meld two hot trends – copper finishes and the industrial look – with these quick-to-make copper hooks. You will need a long board, copper pipe elbows, a dowel that is large enough to fit snugly in the pipe, as well as a drill, screws and hot glue. Start by fitting a pipe over the dowel. Mark a line where the pipe ends. Cut the dowel at this mark and repeat it so that you have one dowel piece for each pipe section you plan to use. Next, screw the dowel pieces into the board at regular intervals. You can use as many or as few as you like. Finally, apply hot glue into one end of the copper pipe and fit it over the wooden dowel piece that is attached to the board. Repeat for the remaining pipe pieces, making sure that the elbows are all facing the same direction! Now, just mount the board and hang whatever you like. These are great for the kitchen, bathroom, or entryway – anywhere you want to add a piece of industrial décor.